Our 20V glue gun set is the perfect solution for your DIY projects, including 12 regular glue sticks (11 mm) in clear for home repairs, crafts, and construction needs. What's more, the integrated front LED light enables you to work confidently in dimly lit areas, so you can tackle any project with ease. Let our 20V glue gun set be your go-to tool for all your crafting needs!

Our 20V cordless glue gun features a cutting-edge anti-drip design, minimizing any messy drips after use. Plus, for your peace of mind, we've included a Smart Power-Off System that automatically shuts down the gun after 5 minutes of inactivity. Safety and convenience are our top priorities!

With a preheating time of only 120 seconds, it's as fast as your average light-duty glue gun, but with the superior strength and power to handle even the toughest projects. Upgrade your crafting game today with our versatile and reliable cordless glue gun.

1. Long press the bottom for 3s.

2. Insert a glue stick and push it into the glue gun.

3. Hold the grip firmly and Wipe the glue over the edge where they should be applied.

4. Pull the feed trigger until glue flows from the nozzle. Do NOT over apply.

5. Release the trigger when the desired amount of glue has been applied.

6. Simply place the glued item on the surface.

7. Enjoying the handcraft you made!

1. Long press the button for 1s to switch on the glue gun.

**PLEASE NOTE:

Battery Check: Short press→ Continuous lights →Lights off
Power On: Long press 1s → Flashing lights→ Heating up

2. Insert a glue stick and push it into the gun.

3. Hold the grip firmly and wipe the glue over the edge where they should be applied.

4. Pull the feed trigger until glue flows from the nozzle. Do NOT over apply.

5. Release the trigger when the desired amount of glue has been applied.

6. Simply place the glued item on the surface.

7. Enjoying the handcraft you made!

Specification

Battery Capacity	‎1500 mAh
Voltage	‎20V
Heating Time	‎120S
Included Components	1 Hot Glue Gun, 1 Battery Pack, 1 Charger, 12 Glue Sticks, 1 Manual
Glue Sticks	‎11mm

Questions & Answers

Q: Can any brand glue stick be used with this glue gun?

A: You can use any brand of standard 0.28 in. diameter glue sticks in this glue gun.

Q: How long does it take the glue gun to get hot enough to use?

A: Only need 120s, fast preheating.

Q: How to prevent further drips from the nozzle?

A: You may observe very few drips after turning it off due to technical fast-heating design. Simply place a piece of paper under the nozzle to prevent drips or place the gun in the charing-stand to power-off (only when the stand is plugged in).

Q: Does this have an auto shut off?

A: Yes, this glue gun has 3.5 mins smart power-off system.

Q: How long is the battery expected to last per charge?

A: This gun can support to 90 minutes work at normal conditions.

Q: Can you change the tips of this glue gun?

A: No but you don’t need to. The amount of pressure you put on the trigger determines whether it is a fine tip or regular tip.

Q: How to identify if the gun starts working or not?

A: Do NOT try to touch the nozzle as it may cause scald. Long press the top button for 1s, and the flashing lights indicate the pre-heating process is properly working now.

Q: Do I need to repeat the process if I just have it back to the charger for a few seconds?

A: No, the gun will automatically switch to charging mode in the stand (make sure the charger is plugged in), which is power-off. Once you ready back to work, the gun will switch to working mode once leaves the charger. So simply grab it and start your project.